1
For Sale / Wanted / Re: K 1200 /1300S PARTS FOR SALE
« on: June 28, 2015, 02:32:41 pm »
Hello bars now sold
Roll up roll up any more for any mor
Roll up roll up any more for any mor
If you haven't introduced yourself in the 'Who's Who' section, please do!
Show Posts
You can view here all posts made by this member. Note that you can only see posts made in areas to which you currently have access.
2
For Sale / Wanted / Re: K 1200 /1300S PARTS FOR SALE
« on: June 27, 2015, 09:16:06 am »
Hi Costas
Are you looking over my shoulder top box now sold on Ebay
thanks
Brian
Are you looking over my shoulder
top box now sold on Ebaythanks
Brian
3
For Sale / Wanted / Re: K 1200 /1300S PARTS FOR SALE
« on: June 27, 2015, 08:29:09 am »
Thanks to Costas
No the top box will not fit the s but will fit the GT ST RT & F MODLES PART NO 77437724352
THANKS BRIAN
No the top box will not fit the s but will fit the GT ST RT & F MODLES PART NO 77437724352
THANKS BRIAN
4
For Sale / Wanted / Re: K 1200 /1300S PARTS FOR SALE
« on: June 27, 2015, 08:01:18 am »
Hi Tony
You are correct no modifications are required to any cables or break lines
Full instructions are with the bars it takes about an hour to fit.
Cheers Brian
You are correct no modifications are required to any cables or break lines
Full instructions are with the bars it takes about an hour to fit.
Cheers Brian
5
For Sale / Wanted / Re: K 1200 /1300S PARTS FOR SALE
« on: June 26, 2015, 07:37:29 pm »
The manual refers to the gt ,st,rt
Ref no 01 29 7 720 643 09/2008 or k28 r71025a
Cant find any other possible part numbers
Brian
Ref no 01 29 7 720 643 09/2008 or k28 r71025a
Cant find any other possible part numbers
Brian
6
For Sale / Wanted / Re: K 1200 /1300S PARTS FOR SALE
« on: June 26, 2015, 06:29:58 pm »
Hi I believe so but never had it on my k purchased it for my new bike
But different fitting. Check with a dealer
Brian
But different fitting. Check with a dealer
Brian
7
For Sale / Wanted / K 1200 /1300S PARTS FOR SALE
« on: June 26, 2015, 10:13:02 am »
As you no i have sold my K1300 s so parts are up for grabs they are on ebay as well all have reserves on them at these prices.
Helli bars £100
Black Baglux tank cover £45
SW Motec metal work for panniers & top box givi or kappa fittings £50
BMW small top box fits MOST BMW BUT NOT THE LATER R & RS
with new lock so you can code to your own key £125
Kapa K40 panniers £100
BMW low seat 790mm £120
would prefer collection or meet up will post but cost dependant on location
Helli bars £100
Black Baglux tank cover £45
SW Motec metal work for panniers & top box givi or kappa fittings £50
BMW small top box fits MOST BMW BUT NOT THE LATER R & RS
with new lock so you can code to your own key £125Kapa K40 panniers £100
BMW low seat 790mm £120
would prefer collection or meet up will post but cost dependant on location
8
The Euro K Club Lounge / Re: Time to say good bye to my K
« on: June 01, 2015, 09:06:28 pm »
Thanks guys 
I too Chris had both a 1100s and the 1200st loved the s the st not so the st swaped it after throwing it down the road the rs is a lot more balanced feels very light with accurate stearing the demo had only done 500 miles but was fine two up for 90 mins test ride. Traveld from Wolverhampton to Bridge north then back to the stew poney ( pub now gone but the name lingers on) then back up the A449 back to Wolverhampton roads i gues you know well
. The fast k bike was was begining to becaome the issue as well as we all know hi speed with very little effort
was not good form my licence which i need for work so that did have some input
Cheers
Brian
will let you know how things go
I too Chris had both a 1100s and the 1200st loved the s the st not so the st swaped it after throwing it down the road the rs is a lot more balanced feels very light with accurate stearing the demo had only done 500 miles but was fine two up for 90 mins test ride. Traveld from Wolverhampton to Bridge north then back to the stew poney ( pub now gone but the name lingers on) then back up the A449 back to Wolverhampton roads i gues you know well
. The fast k bike was was begining to becaome the issue as well as we all know hi speed with very little effort was not good form my licence which i need for work so that did have some input
Cheers
Brian
will let you know how things go
9
The Euro K Club Lounge / Time to say good bye to my K
« on: May 31, 2015, 08:33:15 am »
Well After 5 years on K bikes its time for a change but still a BMW ....... Its a R1200RS Sport in lupin blue & white less power i know but so much lighter and more nimble and easy for me to manage two up with fully loaded and no big clunk into fist makes a nice change. Pick t up next weekend which gives me a week to get 600 mile on it for its first service which will be fun as i dont use it for work then off on the monday to Europe for 10 days. Mad i know
cheers
Brian
i will be sticking around on here
cheers
Brian
i will be sticking around on here
10
Kit Reviews / Re: Waterproofs
« on: May 04, 2015, 10:21:59 pm »
Hi fjtwelve
Me I use Halverson 's as they do different 3 different leg lenths for each waist size. on my third jacket
1. Cut off me after an rta
2. After 5 years use serviceable but looking passed its best
3. 4 weeks old and loving it.
I have re proofed the trousers a couple. Of times looking good after 5 years.
After seeing me crash testing the first jacket quite a few friends from the local bike
Group started by there kit too.
It's not cheap but is good. Quality you get what you pay for I have found over the years
Me I use Halverson 's as they do different 3 different leg lenths for each waist size. on my third jacket
1. Cut off me after an rta
2. After 5 years use serviceable but looking passed its best
3. 4 weeks old and loving it.
I have re proofed the trousers a couple. Of times looking good after 5 years.
After seeing me crash testing the first jacket quite a few friends from the local bike
Group started by there kit too.
It's not cheap but is good. Quality you get what you pay for I have found over the years
11
K1200 / K1300 Forum / Re: oh no corrosion
« on: May 01, 2015, 08:26:55 pm »
Thankyou oh great one 
Junior Brian lol
Junior Brian lol
12
K1200 / K1300 Forum / Re: oh no corrosion
« on: April 30, 2015, 08:34:03 pm » GOOD NEWS BMW ARE REPLACING THE FORKS AND THE CLUTCH COVER NO STAMPING OF FEET REQUIRED BRIAN( WHO IS VERY HAPPY !!!!)
13
K1200 / K1300 Forum / Re: Mini Tyre Compressor
« on: April 13, 2015, 08:51:19 pm »
Yep carry a slime (where do they get these names from)
From nippy Normans along with a tyre plugger when touring.
But you need to run it directly from the battery as the startup load
is to much for the aux socket.
Brian
From nippy Normans along with a tyre plugger when touring.
But you need to run it directly from the battery as the startup load
is to much for the aux socket.
Brian
14
The Euro K Club Lounge / Re: Speed
« on: April 13, 2015, 08:41:29 pm »
Well thank goodness it's not just me then on my own
Just love the way third gear pull's up to warp speed
The bike and performance so addictive!!!
Just love the way third gear pull's up to warp speed
The bike and performance so addictive!!!
15
The Euro K Club Lounge / M1 J 30 to 28 sputh today
« on: April 13, 2015, 06:03:03 pm »
Hi any one on the M1 south this afternoon
Black 1300s RV62XDM ?
Black 1300s RV62XDM ?